Fiberglass Camper Siding for Camper, RV and Trailer Wall Builds
Fiberglass camper siding from Runfeng is FRP skin and sandwich panel material for camper, RV, trailer and caravan wall builds, produced in Tangshan, Hebei by a manufacturer established in 2004.

Fiberglass Camper Siding Formats for Camper, RV and Trailer Walls
Fiberglass camper siding is a fiberglass-reinforced plastic skin, or a fiberglass-faced sandwich panel, for camper, RV, trailer and caravan walls. The skin forms the outer face and the core behind it gives the wall its stiffness. Runfeng produces FRP sheets on continuous molding production lines at its factory in Tangshan, Hebei, and sells them under the RUNFENG brand to body builders, contractors, distributors and importers.
Common formats for camper wall work include the following: flat FRP sheets and gelcoat FRP panels for skin-only walls, gelcoated FRP panels supplied in rolls for vehicle bodywork where a continuous surface is wanted, and FRP sandwich panels with XPS, PU, EPS, PET foam, plywood or PP honeycomb cores for insulated walls. Each format suits a different assembly method, so the choice follows the wall build rather than the other way round. Thickness, sheet size, colour, core and selling unit are confirmed per product and specification in the quotation.
- Flat FRP sheets and gelcoat FRP panels for skin-only camper and trailer walls
- Gelcoated FRP panels in rolls for vehicle bodywork
- FRP sandwich panels with XPS, PU, EPS, PET foam, plywood or PP honeycomb cores
- Truck body and RV panels for larger body and wall sections
Where a wall needs something outside those formats, such as a mixed core, a particular edge detail or a size that does not follow a standard sheet, the inquiry form is the place to start. On request, colors of FRP sheets and wall panels can be matched to RAL references, confirmed in the quotation.

White flat sheet partially unrolled 
Fanned flat gray sheets with glossy faces
Planning an RV Siding Replacement
A replacement begins with identifying what is damaged. On some campers and trailers the damaged area is a skin on its own: a flat FRP sheet, or FRP in rolls, fixed over a frame or an existing core. On others it is a bonded sandwich panel where skin and core come as one piece. That distinction sets the scope of the replacement, the fixing method and the material to order, so settle it before measuring.
- Measured panel area, taken from the opening rather than from the old skin alone
- Sheet size and thickness, recorded as length, width and gauge
- Edge details, corner shapes and how the old skin was fixed to the frame
- Fixing points, overlaps and trim positions
- Intended wall build: skin thickness plus core type and thickness
Fixing methods belong to the panel, not to a general rule. The FRP sandwich panel supplied under the title Fiberglass Boards Insulated Sandwich Panel Wall Roof Floor Refrigerated Truck Cold Room Bus Floor Incubator Van Camper Trailer states that panels can be assembled with screws, hollow rivets, or by gluing or heat fusion welding, and that method is confirmed against the build in hand.
Measured sizes, thickness and the intended wall build are confirmed in the quotation, alongside the selling unit and packing. Special builds, drawn profiles or dimensions outside those formats go to the inquiry form with a sketch. Runfeng also makes RV fiberglass siding and FRP sandwich panels for body builders working from their own drawings.
Skin, Core and Surface Choices for Camper Wall Panels
FRP is glass fibre reinforcement carried in a polyester resin. A gelcoat gives a sealed outer face that holds colour and covers the fibre pattern; a non-gelcoat sheet shows the laminate and is usually bonded into a build. Faces run smooth or embossed, and the profile, flat or corrugated, follows the job. On a camper wall the gelcoated face normally sits outward, with the core bonded behind it.
The core sets the stiffness and the weight of the wall. PU, XPS and EPS foams give a light insulated build; PET foam and PP honeycomb suit walls where a different stiffness balance is wanted; plywood gives screws and inserts solid material to bite into. Core type and thickness are agreed with the wall build rather than picked from a chart, and the skin on each side can differ.
Runfeng produces its own SKD resin as the base material for its panels, and its FRP sheets run on continuous molding production lines. Its range covers FRP daylighting sheets, anti-corrosive panels, FRP profiles, rock wool sandwich panels, and fasteners and wire, so a wall, its fixings and its roof can be sourced from one supplier.
When specifying, set out the skin format and face finish, the core type and thickness, the sheet size, a colour reference, the edge treatment and the selling unit. A supplier can then quote against a defined build instead of a general description, and sampling and production follow the agreed specification.
Samples, MOQ and Delivery on Fiberglass Camper Siding Orders
MOQ is confirmed by product and specification in the quotation; for several FRP sheet products it is 100 square meters. Free samples of stock items are available on request, with the courier fee paid by the buyer; custom and special sample terms are confirmed on request.
In-stock orders can ship within 7 days; non-stock orders take 7-25 days, confirmed in the quotation. FOB Tianjin Port is available, subject to quotation, and pallet or crate packing options are confirmed in the quotation. The factory is about two hours’ drive from Tianjin Port.
Runfeng offers OEM and ODM services and develops panels, sheets and profiles to customer drawings and specifications, so a body builder can start from a drawing. The in-house testing centre is equipped with xenon lamp ageing testers, UV weathering testers, electronic universal testing machines and photoelectric haze meters, and the company reports exports to 80+ countries.
Orders move through the usual steps: drawings or a description of the wall, quantity and specification, a sample where one is wanted, a quotation, production, inspection and packing, then shipping. Runfeng was established in 2004, and its main markets include North America, South America, Eastern Europe, Southeast Asia, Africa, Oceania, the Middle East, Eastern Asia and Western Europe.
Request a quotation
Describe your project, the panel size and quantity, and we will suggest matching FRP panels.
Or write to sales@frppanelmanufacturer.com